PHYTEC BSP Documentation
BSP Manuals
i.MX 8
i.MX 9
i.MX 93 Manuals
i.MX 95 Manuals
HEAD
1. PHYTEC Documentation
2. Getting Started
3. Building the BSP
4. Installing the OS
5. Development
6. Device Tree (DT)
7. Accessing Peripherals
8. NXP GoPoint demo suite
Quickstart Guide ALPHA1
1. Introduction
2. Requirements
3. Connecting the Board
4. Prebuilt Images
5. System Booting
BSP-Yocto-NXP-i.MX95-ALPHA1
1. PHYTEC Documentation
2. Getting Started
3. Building the BSP
4. Installing the OS
5. Development
6. Device Tree (DT)
7. Accessing Peripherals
8. NXP GoPoint demo suite
Yocto Manuals
Kirkstone
Mickledore
Scarthgap
Application Manuals
RAUC Update & Device Management
Security Manuals
Coprocessor
Contribute
Contribute
PHYTEC BSP Documentation
i.MX 9
i.MX 95 Manuals
Edit on GitHub
i.MX 95 Manuals
HEAD
Table of Contents
1. PHYTEC Documentation
1.1. Supported Hardware
2. Getting Started
2.1. Get the Image
2.2. Write the Image to SD Card
2.3. First Start-up
3. Building the BSP
3.1. Basic Set-Up
3.2. Get the BSP
4. Installing the OS
4.1. Bootmode Switch (S1)
4.2. Flash eMMC
5. Development
5.1. Standalone Build preparation
5.2. U-Boot standalone build
5.3. Kernel standalone build
5.4. Working with UUU-Tool
5.5. Host Network Preparation
5.6. Booting the Kernel from a Network
5.7. Accessing the Development states
5.8. Format SD-Card
6. Device Tree (DT)
6.1. Introduction
6.2. PHYTEC i.MX 95 BSP Device Tree Concept
7. Accessing Peripherals
7.1. i.MX 95 Pin Muxing
7.2. Network
7.3. SD/MMC Card
7.4. e.MMC Devices
7.5. GPIOs
7.6. I²C Bus
7.7. EEPROM
7.8. RTC
7.9. USB Host Controller
7.10. Video
7.11. Display
7.12. Power Management
7.13. Thermal Management
7.14. Watchdog
8. NXP GoPoint demo suite
8.1. ML Benchmark
Quickstart Guide ALPHA1
Table of Contents
1. Introduction
2. Requirements
2.1. Included in the Kit
2.2. Components
2.3. Additional (optional) equipment (not included in Alpha Kit)
2.4. Linux Host PC
3. Connecting the Board
3.1. Connecting the DEBUG USB interface
3.2. Powering the Board
4. Prebuilt Images
5. System Booting
5.1. Boot with SD-Card
BSP-Yocto-NXP-i.MX95-ALPHA1
Table of Contents
1. PHYTEC Documentation
1.1. Supported Hardware
2. Getting Started
2.1. Get the Image
2.2. Write the Image to SD Card
2.3. First Start-up
3. Building the BSP
3.1. Basic Set-Up
3.2. Get the BSP
4. Installing the OS
4.1. Bootmode Switch (S1)
4.2. Flash eMMC
5. Development
5.1. Standalone Build preparation
5.2. U-Boot standalone build
5.3. Kernel standalone build
5.4. Working with UUU-Tool
5.5. Host Network Preparation
5.6. Booting the Kernel from a Network
5.7. Accessing the Development states
5.8. Format SD-Card
6. Device Tree (DT)
6.1. Introduction
6.2. PHYTEC i.MX 95 BSP Device Tree Concept
7. Accessing Peripherals
7.1. i.MX 95 Pin Muxing
7.2. Network
7.3. SD/MMC Card
7.4. e.MMC Devices
7.5. GPIOs
7.6. I²C Bus
7.7. EEPROM
7.8. RTC
7.9. USB Host Controller
7.10. Video
7.11. Display
7.12. Power Management
7.13. Thermal Management
7.14. Watchdog
8. NXP GoPoint demo suite
8.1. ML Benchmark
Languages
Languages
en
zh_CN
Version
imx8mm-pd25.1.0-108-gd357548