Documentation in pdf format: Download
Yocto Reference Manual |
|
|---|---|
Document Title |
Yocto Reference Manual Scarthgap |
Document Type |
Yocto Manual |
Release Date |
XXXX/XX/XX |
Is Branch of |
Yocto Reference Manual |
Compatible BSPs |
BSP Release Type |
BSP Release Date |
BSP Status |
|---|---|---|---|
BSP-Yocto-Ampliphy-i.MX8MP-PD24.1.0 |
Major |
2024-04-02 |
released |
BSP-Yocto-Ampliphy-i.MX8MP-PD24.1.1 |
Minor |
2024-04-09 |
released |
BSP-Yocto-Ampliphy-i.MX8MP-PD24.1.2 |
Minor |
2024-06-26 |
released |
BSP-Yocto-NXP-i.MX8MP-PD24.1.0 |
Major |
2024-11-07 |
released |
BSP-Yocto-NXP-i.MX93-PD24.2.0 |
Major |
2024-10-08 |
released |
BSP-Yocto-Ampliphy-i.MX6UL-PD24.1.0 |
Major |
2024-07-19 |
released |
BSP-Yocto-Ampliphy-AM62Ax-PD24.1.0 |
Major |
2024-06-27 |
released |
BSP-Yocto-Ampliphy-AM62x-PD24.1.0 |
Major |
2024-06-27 |
released |
BSP-Yocto-Ampliphy-AM64x-PD24.1.0 |
Major |
2024-06-27 |
released |
This manual applies to all Scarthgap based PHYTEC releases.
1. The Yocto Project
1.1. PHYTEC Documentation
PHYTEC will provide a variety of hardware and software documentation for all of our products. This includes any or all of the following:
QS Guide: A short guide on how to set up and boot a phyCORE board along with brief information on building a BSP, the device tree, and accessing peripherals.
Hardware Manual: A detailed description of the System on Module and accompanying carrier board.
Yocto Guide: A comprehensive guide for the Yocto version the phyCORE uses. This guide contains an overview of Yocto; introducing, installing, and customizing the PHYTEC BSP; how to work with programs like Poky and Bitbake; and much more.
BSP Manual: A manual specific to the BSP version of the phyCORE. Information such as how to build the BSP, booting, updating software, device tree, and accessing peripherals can be found here.
Development Environment Guide: This guide shows how to work with the Virtual Machine (VM) Host PHYTEC has developed and prepared to run various Development Environments. There are detailed step-by-step instructions for Eclipse and Qt Creator, which are included in the VM. There are instructions for running demo projects for these programs on a phyCORE product as well. Information on how to build a Linux host PC yourself is also a part of this guide.
Pin Muxing Table: phyCORE SOMs have an accompanying pin table (in Excel format). This table will show the complete default signal path, from processor to carrier board. The default device tree muxing option will also be included. This gives a developer all the information needed in one location to make muxing changes and design options when developing a specialized carrier board or adapting a PHYTEC phyCORE SOM to an application.
On top of these standard manuals and guides, PHYTEC will also provide Product Change Notifications, Application Notes, and Technical Notes. These will be done on a case-by-case basis. Most of the documentation can be found in the applicable download page of our products.
1.2. Yocto Introduction
Yocto is the smallest SI metric system prefix. Like milli equates to m =
10^-3, and so is yocto y = 10^-24. Yocto is also a project working group
of the Linux Foundation and therefore
backed up by several major companies in the field. On the Yocto Project website you can read the official introduction:
The Yocto Project is an open-source collaboration project that provides templates, tools, and methods to help you create custom Linux-based systems for embedded products regardless of the hardware architecture. It was founded in 2010 as a collaboration among many hardware manufacturers, open-source operating systems vendors, and electronics companies to bring some order to the chaos of embedded Linux development.
As said, the project wants to provide toolsets for embedded developers. It builds on top of the long-lasting OpenEmbedded project. It is not a Linux distribution. But it contains the tools to create a Linux distribution specially fitted to the product requirements. The most important step in bringing order to the set of tools is to define a common versioning scheme and a reference system. All subprojects have then to comply with the reference system and have to comply with the versioning scheme.
The release process is similar to the Linux kernel. Yocto increases its version number every six months and gives the release a codename. The release list can be found here: https://wiki.yoctoproject.org/wiki/Releases
1.3. Core Components
The most important tools or subprojects of the Yocto Project are:
Bitbake: build engine, a task scheduler like make, interprets metadata
OpenEmbedded-Core, a set of base layers, containing metadata of software, no sources
Yocto kernel
Optimized for embedded devices
Includes many subprojects: rt-kernel, vendor patches
The infrastructure provided by Wind River
Alternative: classic kernel build → we use it to integrate our kernel into Yocto
Yocto Reference BSP: beagleboneblack, minnow max
Poky, the reference system, a collection of projects and tools, used to bootstrap a new distribution based on Yocto
1.4. Vocabulary
1.4.1. Recipes
Recipes contain information about the software project (author, homepage, and license). A recipe is versioned, defines dependencies, contains the URL of the source code, and describes how to fetch, configure, and compile the sources. It describes how to package the software, e.g. into different .deb packages, which then contain the installation path. Recipes are basically written in Bitbake’s own programming language, which has a simple syntax. However, a recipe can contain Python as well as a bash code.
1.4.2. Classes
Classes combine functionality used inside recipes into reusable blocks.
1.4.3. Layers
A layer is a collection of recipes, classes, and configuration metadata. A layer can depend on other layers and can be included or excluded one by one. It encapsulates a specific functionality and fulfills a specific purpose. Each layer falls into a specific category:
Base
Machine (BSP)
Software
Distribution
Miscellaneous
Yocto’s versioning scheme is reflected in every layer as version branches. For each Yocto version, every layer has a named branch in its Git repository. You can add one or many layers of each category in your build.
A collection of OpenEmbedded layers can be found here. The search function is very helpful to see if a software package can be retrieved and integrated easily: https://layers.openembedded.org/layerindex/branch/scarthgap/layers/
1.4.4. Machine
Machines are configuration variables that describe the aspects of the target hardware.
1.4.5. Distribution (Distro)
Distribution describes the software configuration and comes with a set of software features.
1.5. Poky
Poky is the reference system to define Yocto Project compatibility. It combines several subprojects into releases:
Bitbake
Toaster
OpenEmbedded Core
Yocto Documentation
Yocto Reference BSP
1.5.1. Bitbake
Bitbake is the task scheduler. It is written in Python and interprets recipes that contain code in Bitbake’s own programming language, Python, and bash code. The official documentation can be found here: https://docs.yoctoproject.org/bitbake/2.8/index.html
1.5.2. Toaster
Toaster is a web frontend for Bitbake to start and investigate builds. It provides information about the build history and statistics on created images. There are several use cases where the installation and maintenance of a Toaster instance are beneficial. PHYTEC did not add or remove any features to the upstream Toaster, provided by Poky. The best source for more information is the official documentation: https://docs.yoctoproject.org/dev/toaster-manual/index.html
1.6. Official Documentation
For more general questions about Bitbake and Poky consult the mega-manual: https://docs.yoctoproject.org/dev/singleindex.html
2. Compatible Linux Distributions
To build Yocto you need a compatible Linux host development machine. The list of supported distributions can be found in the reference manual: https://docs.yoctoproject.org/dev/ref-manual/system-requirements.html#supported-linux-distributions
3. PHYTEC BSP Introduction
3.1. BSP Structure
The BSP consists roughly of three parts. BSP management, BSP metadata, and BSP content. The management consists of Repo and phyLinux while the metadata depends on the SOC, which describes how to build the software. The content comprises PHYTEC’s Git repositories and external sources.
3.1.1. BSP Management
Yocto is an umbrella project. Naturally, this will force the user to base their work on several external repositories. They need to be managed in a deterministic way. We use manifest files, which contain an XML data structure, to describe all git repositories with pinned-down versions. The Repo tool and our phyLinux wrapper script are used to manage the manifests and set up the BSP, as described in the manifest file.
3.1.1.1. phyLinux
phyLinux is a wrapper for Repo to handle downloading and setting up the BSP with an “out of the box” experience.
3.1.1.2. Repo
Repo is a wrapper around the Repo toolset. The phyLinux script will install
the wrapper in a global path. This is only a wrapper, though. Whenever you run
repo init -u <url>, you first download the Repo tools from Googles Git
server in a specific version to the .repo/repo directory. The next time you
run Repo, all the commands will be available. Be aware that the Repo version
in different build directories can differ over the years if you do not run Repo
sync. Also if you store information for your archives, you need to include the
complete .repo folder.
Repo expects a Git repository which will be parsed from the command line. In the PHYTEC BSP, it is called phy²octo. In this repository, all information about a software BSP release is stored in the form of a Repo XML manifest. This data structure defines URLs of Git servers (called “remotes”) and Git repositories and their states (called “projects”). The Git repositories can be seen in different states. The revision field can be a branch, tag, or commit id of a repository. This means the state of the software is not necessarily unique and can change over time. That is the reason we use only tags or commit ids for our releases. The state of the working directory is then unique and does not change.
The manifests for the releases have the same name as the release itself. It is a unique identifier for the complete BSP. The releases are sorted by the SoC platform. The selected SoC will define the branch of the phy²octo Git repository which will be used for the manifest selection.
3.1.2. BSP Metadata
We include several third-party layers in our BSP to get a complete Linux distribution up and running without the need to integrate external projects. All used repositories are described in the following section.
3.1.2.1. Poky
The PHYTEC BSP is built on top of Poky. It comes with a specific version, defined in the Repo manifest. Poky comes with a specific version of Bitbake. The OpenEmbedded-core layer “meta” is used as a base for our Linux system.
3.1.2.2. meta-openembedded
OpenEmbedded is a collection of different layers containing the meta description for many open-source software projects. We ship all OpenEmbedded layers with our BSP, but not all of them are activated. Our example images pull several software packages generated from OpenEmbedded recipes.
3.1.2.3. meta-qt6
This layer provides an integration of Qt6 in the Poky-based root filesystem and is integrated into our BSP.
3.1.2.4. meta-nodejs
This is an application layer to add recent Node.js versions.
3.1.2.5. meta-gstreamer1.0
This is an application layer to add recent GStreamer versions.
3.1.2.6. meta-rauc
This layer contains the tools required to build an updated infrastructure with RAUC. A comparison with other update systems can be found here: Yocto update tools.
3.1.2.7. meta-phytec
This layer contains all machines and common features for all our BSPs. It is PHYTEC’s Yocto Board Support Package for all supported hardware (since fido) and is designed to be standalone with Poky. Only these two parts are required if you want to integrate the PHYTEC’s hardware into your existing Yocto workflow. The features are:
Bootloaders in
recipes-bsp/barebox/andrecipes-bsp/u-boot/Kernels in
recipes-kernel/linux/anddynamic-layers/fsl-bsp-release/recipes-kernel/linux/Many machines in
conf/machine/Proprietary OpenGL ES/EGL user space libraries for AM335x and i.MX 6 platforms
Proprietary OpenCL libraries for i.MX 6 platforms
3.1.2.8. meta-ampliphy
This is our example distribution and BSP layer. It extends the basic configuration of Poky with software projects described by all the other BSP components. It provides a base for your specific development scenarios. The current features are:
systemd init system
Images:
phytec-headless-imagefor non-graphics applicationsCamera integration with OpenCV and GStreamer examples for the i.MX 6 platform bundled in a
phytec-vision-imageRAUC integration: we set up basic support for an A/B system image update, which is possible locally and over-the-air
3.1.2.9. meta-qt6-phytec
This is our layer for Qt6 board integration and examples. The features are:
Qt6 with eglfs backend for PHYTEC’s AM335x, i.MX 6 and RK3288 platforms
Images:
phytec-qt6demo-imagefor Qt6 and video applicationsA Qt6 demo application demonstrating how to create a Qt6 project using QML widgets and a Bitbake recipe for the Yocto and systemd integration. It can be found in
sources/meta-qt6-phytec/recipes-qt/examples/phytec-qtdemo_git.bb
3.1.2.10. meta-virtualization
This layer provides support for building Xen, KVM, Libvirt, and associated packages necessary for constructing OE-based virtualized solutions.
3.1.2.11. meta-security
This layer provides security tools, hardening tools for Linux kernels, and libraries for implementing security mechanisms.
3.1.2.12. meta-selinux
This layer’s purpose is to enable SE Linux support. The majority of this layer’s work is accomplished in bbappend files, used to enable SE Linux support in existing recipes.
3.1.2.13. meta-browser
This is an application layer to add recent web browsers (Chromium, Firefox, etc.).
3.1.2.14. meta-rust
Includes the Rust compiler and the Cargo package manager for Rust.
3.1.2.15. meta-timesys
Timesys layer for Vigiles Yocto CVE monitoring, security notifications, and image manifest generation.
3.1.2.16. meta-freescale
This layer provides support for the i.MX, Layerscape, and QorIQ product lines.
3.1.2.17. meta-freescale-3rdparty
Provides support for boards from various vendors.
3.1.2.18. meta-freescale-distro
This layer provides support for Freescale’s Demonstration images for use with OpenEmbedded and/or Yocto Freescale’s BSP layer.
3.1.2.19. base (fsl-community-bsp-base)
This layer provides BSP base files of NXP.
3.1.2.20. meta-fsl-bsp-release
This is the i.MX Yocto Project Release Layer.
3.1.3. BSP Content
The BSP content gets pulled from different online sources when you first start
using Bitbake. All files will be downloaded and cloned in a local directory
configured as DL_DIR in Yocto. If you backup your BSP with the complete
content, those sources have to be backed up, too. How you can do this will be
explained in the chapter Generating Source Mirrors, working Offline.
3.2. Build Configuration
The BSP initializes a build folder that will contain all files you
create by running Bitbake commands. It contains a conf folder
that handles build input variables.
bblayers.confdefines activated meta-layers,local.confdefines build input variables specific to your buildsite.confdefines build input variables specific to the development host
The two topmost build input variables are DISTRO and MACHINE. They are
preconfigured local.conf when you check out the BSP using phyLinux.
We use “Ampliphy” as DISTRO with our BSP. This distribution will be
preselected and give you a starting point for implementing your own
configuration.
A MACHINE defines a binary image that supports specific hardware
combinations of module and baseboard. Check the machine.conf file or our
webpage for a description of the hardware.
4. Pre-built Images
For each BSP we provide pre-built target images that can be downloaded from the PHYTEC FTP server: https://download.phytec.de/Software/Linux/
These images are also used for the BSP tests, which are flashed to the boards
during production. You can use the provided .wic images to create a bootable
SD card at any time. Identify your hardware and flash the downloaded image file
to an empty SD card using dd. Please see section Images for information
about the correct usage of the command.
5. BSP Workspace Installation
5.1. Setting Up the Host
You can set up the host or use one of our build-container to run a Yocto build. You need to have a running Linux distribution. It should be running on a powerful machine since a lot of compiling will need to be done.
If you want to use a build-container, you only need to install following packages on your host
host:~$ sudo apt install wget git
Continue with the next step Git Configuration after that. The documentation for using build-container can be found in this manual after Advanced Usage of phyLinux.
Else Yocto needs a handful of additional packages on your host. For Ubuntu you need
host:~$ sudo apt install gawk wget git diffstat unzip texinfo \
gcc build-essential chrpath socat cpio python3 python3-pip \
python3-pexpect xz-utils debianutils iputils-ping python3-git \
python3-jinja2 libegl1-mesa libsdl1.2-dev \
python3-subunit mesa-common-dev zstd liblz4-tool file locales
For other distributions you can find information in the Yocto Quick Build: https://docs.yoctoproject.org/dev/brief-yoctoprojectqs/index.html
5.2. Git Configuration
The BSP heavily utilizes Git. Git needs some information from
you as a user to identify who made changes. Create a ~/.gitconfig with the
following content, if you do not have one
[user]
name = <Your Name>
email = <Your Mail>
[core]
editor = vim
[merge]
tool = vimdiff
[alias]
co = checkout
br = branch
ci = commit
st = status
unstage = reset HEAD --
last = log -1 HEAD
[push]
default = current
[color]
ui = auto
You should set name and email in your Git configuration, otherwise,
Bitbake will complain during the first build. You can use the two commands to
set them directly without editing ~/.gitconfig manually
host:~$ git config --global user.email "your_email@example.com"
host:~$ git config --global user.name "name surname"
5.3. site.conf Setup
Before starting the Yocto build, it is advisable to configure the development setup. Two things are most important: the download directory and the cache directory. PHYTEC strongly recommends configuring the setup as it will reduce the compile time of consequent builds.
A download directory is a place where Yocto stores all sources fetched from the internet. It can contain tar.gz, Git mirror, etc. It is very useful to set this to a common shared location on the machine. Create this directory with 777 access rights. To share this directory with different users, all files need to have group write access. This will most probably be in conflict with default umask settings. One possible solution would be to use ACLs for this directory
host:~$ sudo apt-get install acl
host:~$ sudo setfacl -R -d -m g::rwx <dl_dir>
If you have already created a download directory and want to fix the permissions afterward, you can do so with
host:~$ sudo find /home/share/ -perm /u=r ! -perm /g=r -exec chmod g+r \{\} \;
host:~$ sudo find /home/share/ -perm /u=w ! -perm /g=w -exec chmod g+w \{\} \;
host:~$ sudo find /home/share/ -perm /u=x ! -perm /g=x -exec chmod g+x \{\} \;
The cache directory stores all stages of the build process. Poky has quite an involved caching infrastructure. It is advisable to create a shared directory, as all builds can access this cache directory, called the shared state cache.
Create the two directories on a drive where you have approximately 50 GB of
space and assign the two variables in your build/conf/local.conf:
DL_DIR ?= "<your_directory>/yocto_downloads"
SSTATE_DIR ?= "<your_directory>/yocto_sstate"
If you want to know more about configuring your build, see the documented example settings
sources/poky/meta-yocto/conf/local.conf.sample
sources/poky/meta-yocto/conf/local.conf.sample.extended
6. phyLinux Documentation
The phyLinux script is a basic management tool for PHYTEC Yocto BSP releases written in Python. It is mainly a helper to get started with the BSP structure. You can get all the BSP sources without the need of interacting with Repo or Git.
The phyLinux script has only one real dependency. It requires the wget tool installed on your host. It will also install the Repo tool in a global path (/usr/local/bin) on your host PC. You can install it in a different location manually. Repo will be automatically detected by phyLinux if it is found in the PATH. The Repo tool will be used to manage the different Git repositories of the Yocto BSP.
6.1. Get phyLinux
The phyLinux script can be found on the PHYTEC download server: https://download.phytec.de/Software/Linux/Yocto/Tools/phyLinux
6.2. Basic Usage
For the basic usage of phyLinux, type
host:~$ ./phyLinux --help
which will result in
usage: phyLinux [-h] [-v] [--verbose] {init,info,clean} ...
This Programs sets up an environment to work with The Yocto Project on Phytecs
Development Kits. Use phyLinx <command> -h to display the help text for the
available commands.
positional arguments:
{init,info,clean} commands
init init the phytec bsp in the current directory
info print info about the phytec bsp in the current directory
clean Clean up the current working directory
optional arguments:
-h, --help show this help message and exit
-v, --version show program's version number and exit
--verbose
6.3. Initialization
Create a fresh project folder
host:~$ mkdir ~/yocto
Calling phyLinux will use the default Python version. Starting with Ubuntu 20.04 it will be Python3. If you want to initiate a BSP, which is not compatible with Python3, you need to set Python2 as default (temporarily) before running phyLinux
host:~$ ln -s \`which python2\` python && export PATH=`pwd`:$PATH
Now run phyLinux from the new folder
host:~$ ./phyLinux init
A clean folder is important because phyLinux will clean its working directory. Calling phyLinux from a directory that isn’t empty will result in the following warning:
This current directory is not empty. It could lead to errors in the BSP configuration
process if you continue from here. At the very least, you have to check your build directory
for settings in bblayers.conf and local.conf, which will not be handled correctly in
all cases. It is advisable to start from an empty directory of call:
$ ./phyLinux clean
Do you really want to continue from here?
[yes/no]:
On the first initialization, the phyLinux script will ask you to install the Repo tool in your /usr/local/bin directory. During the execution of the init command, you need to choose your processor platform (SoC), PHYTEC’s BSP release number, and the hardware you are working on
***************************************************
* Please choose one of the available SoC Platforms:
*
* 1: am335x
* 2: am57x
* 3: am62ax
* 4: am62x
* 5: am64x
* 6: am68x
* 7: imx6
* 8: imx6ul
* 9: imx7
* 10: imx8
* 11: imx8m
* 12: imx8mm
* 13: imx8mp
* 14: imx8x
* 15: imx93
* 16: nightly
* 17: rk3288
* 18: stm32mp13x
* 19: stm32mp15x
* 20: topic
# Exemplary output for chosen imx8mp
***************************************************
* Please choose one of the available Releases:
*
* 1: BSP-Yocto-Ampliphy-i.MX8MP-PD24.1-rc1
* 2: BSP-Yocto-Ampliphy-i.MX8MP-PD24.1-rc2
* 3: BSP-Yocto-Ampliphy-i.MX8MP-PD24.1.0
* 4: BSP-Yocto-Ampliphy-i.MX8MP-PD24.1.1
* 5: BSP-Yocto-Ampliphy-i.MX8MP-PD24.1.2-rc1
* 6: BSP-Yocto-Ampliphy-i.MX8MP-PD24.1.2
* 7: BSP-Yocto-Ampliphy-i.MX8MP-PD24.1.y
* 8: BSP-Yocto-Ampliphy-i.MX8MP-master
* 9: BSP-Yocto-FSL-i.MX8MP-ALPHA1
* 10: BSP-Yocto-FSL-i.MX8MP-ALPHA2
* 11: BSP-Yocto-FSL-i.MX8MP-PD21.1-rc1
* 12: BSP-Yocto-FSL-i.MX8MP-PD21.1-rc2
* 13: BSP-Yocto-FSL-i.MX8MP-PD21.1.0
* 14: BSP-Yocto-FSL-i.MX8MP-PD21.1.1-rc1
* 15: BSP-Yocto-FSL-i.MX8MP-PD21.1.1-rc2
* 16: BSP-Yocto-FSL-i.MX8MP-PD21.1.1
* 17: BSP-Yocto-FSL-i.MX8MP-PD21.1.2-rc1
* 18: BSP-Yocto-FSL-i.MX8MP-PD21.1.2-rc2
* 19: BSP-Yocto-FSL-i.MX8MP-PD21.1.2
* 20: BSP-Yocto-FSL-i.MX8MP-PD21.1.3-rc1
* 21: BSP-Yocto-FSL-i.MX8MP-PD21.1.3
* 22: BSP-Yocto-NXP-i.MX8MP-PD22.1-rc1
* 23: BSP-Yocto-NXP-i.MX8MP-PD22.1-rc2
* 24: BSP-Yocto-NXP-i.MX8MP-PD22.1-rc3
* 25: BSP-Yocto-NXP-i.MX8MP-PD22.1-rc4
* 26: BSP-Yocto-NXP-i.MX8MP-PD22.1.0
* 27: BSP-Yocto-NXP-i.MX8MP-PD22.1.1-rc1
* 28: BSP-Yocto-NXP-i.MX8MP-PD22.1.1-rc2
* 29: BSP-Yocto-NXP-i.MX8MP-PD22.1.1-rc3
* 30: BSP-Yocto-NXP-i.MX8MP-PD22.1.1-rc4
* 31: BSP-Yocto-NXP-i.MX8MP-PD22.1.1
* 32: BSP-Yocto-NXP-i.MX8MP-PD22.1.2-rc1
* 33: BSP-Yocto-NXP-i.MX8MP-PD22.1.2-rc2
* 34: BSP-Yocto-NXP-i.MX8MP-PD22.1.2
* 35: BSP-Yocto-NXP-i.MX8MP-PD22.1.y
* 36: BSP-Yocto-NXP-i.MX8MP-PD23.1-rc1
* 37: BSP-Yocto-NXP-i.MX8MP-PD23.1-rc2
* 38: BSP-Yocto-NXP-i.MX8MP-PD23.1-rc3
* 39: BSP-Yocto-NXP-i.MX8MP-PD23.1-rc4
* 40: BSP-Yocto-NXP-i.MX8MP-PD23.1-rc5
* 41: BSP-Yocto-NXP-i.MX8MP-PD23.1-rc6
* 42: BSP-Yocto-NXP-i.MX8MP-PD23.1.0
* 43: BSP-Yocto-NXP-i.MX8MP-PD23.1.y
* 44: BSP-Yocto-NXP-i.MX8MP-PD24.1-rc1
* 45: BSP-Yocto-NXP-i.MX8MP-PD24.1-rc2
* 46: BSP-Yocto-NXP-i.MX8MP-PD24.1-rc3
* 47: BSP-Yocto-NXP-i.MX8MP-PD24.1.0
* 48: BSP-Yocto-NXP-i.MX8MP-PD24.1.y
# Exemplary output for chosen BSP-Yocto-NXP-i.MX8MP-PD24.1.0
*********************************************************************
* Please choose one of the available builds:
*
no: machine: description and article number
distro: supported yocto distribution
target: supported build target
1: phyboard-pollux-imx8mp-3: PHYTEC phyBOARD-Pollux i.MX8M Plus 1-4GB RAM
Pollux PL1552.2
PB-03123-001.A3
distro: ampliphy-vendor
target: phytec-headless-image
2: phyboard-pollux-imx8mp-3: PHYTEC phyBOARD-Pollux i.MX8M Plus 1-4GB RAM
Pollux PL1552.2
PB-03123-001.A3
distro: ampliphy-vendor-rauc
target: phytec-headless-bundle
target: phytec-headless-image
3: phyboard-pollux-imx8mp-3: PHYTEC phyBOARD-Pollux i.MX8M Plus 1-4GB RAM
Pollux PL1552.2
PB-03123-001.A3
distro: ampliphy-vendor-xwayland
target: -c populate_sdk phytec-qt6demo-image
target: phytec-qt6demo-image
target: phytec-vision-image
4: phyboard-pollux-imx8mp-3: PHYTEC phyBOARD-Pollux i.MX8M Plus 1-4GB RAM
Pollux PL1552.2
PB-03123-001.A3
distro: securiphy-vendor
target: phytec-securiphy-bundle
target: phytec-securiphy-image
5: phyboard-pollux-imx8mp-3: PHYTEC phyBOARD-Pollux i.MX8M Plus 1-4GB RAM
Pollux PL1552.2
PB-03123-001.A3
distro: securiphy-vendor-provisioning
target: phytec-provisioning-image
If you cannot identify your board with the information given in the selector, have a look at the invoice for the product. After the configuration is done, you can always run
host:~$ ./phyLinux info
# Exemplary output
**********************************************
* The current BSP configuration is:
*
* SoC: refs/heads/imx8mp
* Release: BSP-Yocto-NXP-i.MX8MP-PD24.1.0
*
**********************************************
to see which SoC and Release are selected in the current workspace. If you do not want to use the selector, phyLinux also supports command-line arguments for several settings
host:~$ MACHINE=phyboard-pollux-imx8mp-3 ./phyLinux init -p imx8mp -r BSP-Yocto-Ampliphy-i.MX8MP-PD24.1.0
or view the help command for more information
host:~$ ./phyLinux init --help
usage: phyLinux init [-h] [--verbose] [--no-init] [-o REPOREPO] [-b REPOREPO_BRANCH] [-x XML] [-u URL] [-p PLATFORM] [-r RELEASE]
options:
-h, --help show this help message and exit
--verbose
--no-init dont execute init after fetch
-o REPOREPO Use repo tool from another url
-b REPOREPO_BRANCH Checkout different branch of repo tool
-x XML Use a local XML manifest
-u URL Manifest git url
-p PLATFORM Processor platform
-r RELEASE Release version
After the execution of the init command, phyLinux will print a few important notes as well as information for the next steps in the build process.
6.4. Advanced Usage
phyLinux can be used to transport software states over any medium. The state of the software is uniquely identified by manifest.xml. You can create a manifest, send it to another place and recover the software state with
host:~$ ./phyLinux init -x manifest.xml
You can also create a Git repository containing your software states. The Git repository needs to have branches other than master, as we reserved the master branch for different usage. Use phyLinux to check out the states
host:~$ ./phyLinux -u <url-of-your-git-repo>
7. Using build-container
Warning
Currently, it is not possible to run the phyLinux script inside of a container. After a complete init with the phyLinux script on your host machine, you can use a container for the build. If you do not have phyLinux script running on your machine, please see phyLinux Documentation.
There are various possibilities to run a build-container. Commonly used is docker and podman, though we prefer podman as it does not need root privileges to run.
7.1. Installation
How to install podman: https://podman.io How to install docker: https://docs.docker.com/engine/install/
7.2. Available container
Right now we provide 4 different container based on Ubuntu LTS versions: https://hub.docker.com/u/phybuilder
yocto-ubuntu-16.04
yocto-ubuntu-18.04
yocto-ubuntu-20.04
yocto-ubuntu-22.04
These containers can be run with podman or docker. With Yocto Project branch Scarthgap the container “yocto-ubuntu-20.04” is preferred.
7.3. Download/Pull container
host:~$ podman pull docker.io/phybuilder/yocto-ubuntu-20.04
OR
host:~$ docker pull docker.io/phybuilder/yocto-ubuntu-20.04
By adding a tag at the end separated by a colon, you can also pull or run a special tagged container.
podman pull docker.io/phybuilder/yocto-ubuntu-20.04:phy2
You can find all available tags in our duckerhub space:
If you try to run a container, which is not pulled/downloaded, it will be pulled/downloaded automatically.
You can have a look at all downloaded/pulled container with:
$USERNAME@$HOSTNAME:~$ podman images
REPOSITORY TAG IMAGE ID CREATED SIZE
docker.io/phybuilder/yocto-ubuntu-22.04 latest d626178e448d 4 months ago 935 MB
docker.io/phybuilder/yocto-ubuntu-22.04 phy2 d626178e448d 4 months ago 935 MB
docker.io/phybuilder/yocto-ubuntu-20.04 phy2 e29a88b7172a 4 months ago 900 MB
docker.io/phybuilder/yocto-ubuntu-20.04 latest e29a88b7172a 4 months ago 900 MB
docker.io/phybuilder/yocto-ubuntu-18.04 phy1 14c9c3e477d4 7 months ago 567 MB
docker.io/phybuilder/yocto-ubuntu-18.04 latest 14c9c3e477d4 7 months ago 567 MB
docker.io/phybuilder/yocto-ubuntu-16.04 phy1 28c73e13ab4f 7 months ago 599 MB
docker.io/phybuilder/yocto-ubuntu-16.04 latest 28c73e13ab4f 7 months ago 599 MB
docker.io/phybuilder/yocto-ubuntu-22.04 phy1 5a0ef4b41935 8 months ago 627 MB
docker.io/phybuilder/yocto-ubuntu-20.04 phy1 b5a26a86c39f 8 months ago 680 MB
7.4. Run container
To run and use container for a Yocto build, first enter to your folder, where you run phyLinux init before. Then start the container
host:~$ podman run --rm=true -v /home:/home --userns=keep-id --workdir=$PWD -it docker.io/phybuilder/yocto-ubuntu-20.04 bash
Note
To run and use a container with docker, it is not that simple like with podman. Therefore the container-user has to be defined and configured. Furthermore forwarding of credentials is not given per default and has to be configured as well.
Now your commandline should look something like that (where $USERNAME is the user, who called “podman run” and the char/number code diffs every time a container is started)
$USERNAME@6593e2c7b8f6:~$
Warning
If the given username is “root” you will not be able to run bitbake at all. Please be sure, you run the container with your own user.
Now you are ready to go on and starting the build. To stop/close the container, just call
$USERNAME@6593e2c7b8f6:~$ exit
8. Working with Poky and Bitbake
8.1. Start the Build
After you download all the metadata with phyLinux init, you have to set up the shell environment variables. This needs to be done every time you open a new shell for starting builds. We use the shell script provided by Poky in its default configuration. From the root of your project directory type
host:~$ source sources/poky/oe-init-build-env
The abbreviation for the source command is a single dot
host:~$ . sources/poky/oe-init-build-env
The current working directory of the shell should change to build/. Before building for the first time, you should take a look at the main configuration file
host:~$ vim conf/local.conf
Your local modifications for the current build are stored here. Depending on the SoC, you might need to accept license agreements. For example, to build the image for Freescale/NXP processors you need to accept the GPU and VPU binary license agreements. You have to uncomment the corresponding line
# Uncomment to accept NXP EULA # EULA can be found under
../sources/meta-freescale/EULA ACCEPT_FSL_EULA = "1"
Now you are ready to build your first image. We suggest starting with our smaller non-graphical image phytec-headless-image to see if everything is working correctly
host:~$ bitbake phytec-headless-image
The first compile process takes about 40 minutes on a modern Intel Core i7. All subsequent builds will use the filled caches and should take about 3 minutes.
8.2. Images images
If everything worked, the images can be found under
host:~$ cd deploy/images/<MACHINE>
The easiest way to test your image is to configure your board for SD card boot and to flash the build image to the SD card
host:~$ sudo dd if=phytec-headless-image-<MACHINE>.wic of=/dev/<your_device> bs=1M conv=fsync
Here <your_device> could be “sde”, for example, depending on your system. Be very careful when selecting the right drive! Selecting the wrong drive can erase your hard drive! The parameter conv=fsync forces a data buffer to write to the device before dd returns.
After booting you can log in using a serial cable or over ssh. There is no root password. That is because of the debug settings in conf/local.conf. If you uncomment the line
#EXTRA_IMAGE_FEATURES = "debug-tweaks"
the debug settings, like setting an empty root password, will not be applied.
8.3. Accessing the Development States between Releases
Special release manifests exist to give you access to the current development states of the Yocto BSP. They will be displayed in the phyLinux selection menu with the ending PDXX.X.y
host:~$ ./phyLinux init -p imx8mp -r BSP-Yocto-Ampliphy-i.MX8MP-PD24.1.y
This will initialize a BSP that will track the latest development state.
8.4. Inspect your Build Configuration
Poky includes several tools to inspect your build layout. You can inspect the commands of the layer tool
host:~$ bitbake-layers
It can, for example, be used to view in which layer a specific recipe gets modified
host:~$ bitbake-layers show-appends
Before running a build you can also launch Toaster to be able to inspect the build details with the Toaster web GUI
host:~$ source toaster start
Maybe you need to install some requirements, first
host:~$ pip3 install -r
../sources/poky/bitbake/toaster-requirements.txt
You can then point your browser to http://0.0.0.0:8000/ and continue working with Bitbake. All build activity can be monitored and analyzed from this web server. If you want to learn more about Toaster, look at https://docs.yoctoproject.org/dev/toaster-manual/index.html. To shut down the Toaster web GUI again, execute
host:~$ source toaster stop
8.5. BSP Features of meta-phytec and meta-ampliphy
8.5.1. Buildinfo
The buildinfo task is a feature in our recipes that prints instructions to fetch the source code from the public repositories. So you do not have to look into the recipes yourself. To see the instructions, e.g. for the barebox package, execute
host:~$ bitbake barebox -c buildinfo
in your shell. This will print something like
(mini) HOWTO: Use a local git repository to build barebox:
To get source code for this package and version (barebox-2022.02.0-phy1), execute
$ mkdir -p ~/git
$ cd ~/git
$ git clone git://git.phytec.de/barebox barebox
$ cd ~/git/barebox
$ git checkout -b v2022.02.0-phy1-local-development 7fe12e65d770f7e657e683849681f339a996418b
You now have two possible workflows for your changes:
1. Work inside the git repository:
Copy and paste the following snippet to your "local.conf":
SRC_URI:pn-barebox = "git://${HOME}/git/barebox;branch=${BRANCH}"
SRCREV:pn-barebox = "${AUTOREV}"
BRANCH:pn-barebox = "v2022.02.0-phy1-local-development"
After that you can recompile and deploy the package with
$ bitbake barebox -c compile
$ bitbake barebox -c deploy
Note: You have to commit all your changes. Otherwise yocto doesn't pick them up!
2. Work and compile from the local working directory
To work and compile in an external source directory we provide the
externalsrc.bbclass. To use it, copy and paste the following snippet to your
"local.conf":
INHERIT += "externalsrc"
EXTERNALSRC:pn-barebox = "${HOME}/git/barebox"
EXTERNALSRC_BUILD:pn-barebox = "${HOME}/git/barebox"
Note: All the compiling is done in the EXTERNALSRC directory. Every time
you build an Image, the package will be recompiled and build.
NOTE: Tasks Summary: Attempted 1 tasks of which 0 didn't need to be rerun and all succeeded.
NOTE: Writing buildhistory
As you can see, everything is explained in the output.
Warning
Using externalsrc breaks a lot of Yocto’s internal dependency mechanisms. It is not guaranteed that any changes to the source directory are automatically picked up by the build process and incorporated into the root filesystem or SD card image. You have to always use –force. E.g. to compile barebox and redeploy it to deploy/images/<machine> execute
host:~$ bitbake barebox -c compile --force
host:~$ bitbake barebox -c deploy
To update the SD card image with a new kernel or image first force the compilation of it and then force a rebuild of the root filesystem. Use
host:~$ bitbake phytec-qt6demo-image -c rootfs --force
Note that the build system is not modifying the external source directory. If you want to apply all patches the Yocto recipe is carrying to the external source directory, run the line
SRCTREECOVEREDTASKS="" BB_ENV_PASSTHROUGH_ADDITIONS="$BB_ENV_PASSTHROUGH_ADDITIONS SRCTREECOVEREDTASKS" bitbake <recipe> -c patch
8.6. BSP Customization
To get you started with the BSP, we have summarized some basic tasks from the Yocto official documentation. It describes how to add additional software to the image, change the kernel and bootloader configuration, and integrate patches for the kernel and bootloader.
Minor modifications, such as adding software, are done in the file build/conf/local.conf. There you can overwrite global configuration variables and make small modifications to recipes.
There are 2 ways to make major changes:
Either create your own layer and use bbappend files.
Add everything to PHYTEC’s Distro layer meta-ampliphy.
Creating your own layer is described in the section Create your own Layer.
8.6.1. Disable Qt Demo
By default, the BSP image phytec-qt6demo-image starts a Qt6 Demo application on the attached display or monitor. If you want to stop the demo and use the Linux framebuffer console behind it, connect to the target via serial cable or ssh and execute the shell command
target:~$ systemctl stop phytec-qtdemo.service
This command stops the demo temporarily. To start it again, reboot the board or execute
target:~$ systemctl start phytec-qtdemo.service
You can disable the service permanently, so it does not start on boot
target:~$ systemctl disable phytec-qtdemo.service
Tip
The last command only disables the service. It does not stop immediately. To see the current status execute
target:~$ systemctl status phytec-qtdemo.service
If you want to disable the service by default, edit the file build/conf/local.conf and add the following line
# file build/conf/local.conf
SYSTEMD_AUTO_ENABLE:pn-phytec-qtdemo = "disable"
After that, rebuild the image
host:~$ bitbake phytec-qt6demo-image
8.6.2. Framebuffer Console
On boards with a display interface, the framebuffer console is enabled per default. You can attach a USB keyboard and log in. To change the keyboard layout from the English default to German, type
target:~$ loadkeys /usr/share/keymaps/i386/qwertz/de-latin1.map.gz
To detach the framebuffer console, run
target:~$ echo 0 > sys/class/vtconsole/vtcon1/bind
To completely deactivate the framebuffer console, disable the following kernel configuration option
Device Drivers->Graphics Support->Support for framebuffer devices->Framebuffer Console Support
More information can be found at: https://www.kernel.org/doc/Documentation/fb/fbcon.txt
8.6.3. Tools Provided in the Prebuild Image
8.6.3.1. RAM Benchmark
Performing RAM and cache performance tests can best be done by using pmbw (Parallel Memory Bandwidth Benchmark/Measurement Tool). Pmbw runs several assembly routines which all use different access patterns to the caches and RAM of the SoC. Before running the test, make sure that you have about 2 MiB of space left on the device for the log files. We also lower the level of the benchmark to ask the kernel more aggressively for resources. The benchmark test will take several hours.
To start the test type
target:~$ nice -n -2 pmbw
Upon completion of the test run, the log file can be converted to a gnuplot script with
target:~$ stats2gnuplot stats.txt > run1.gnuplot
Now you can transfer the file to the host machine and install any version of gnuplot
host:~$ sudo apt-get install gnuplot host:~$ gnuplot run1.gnuplot
The generated plots-<machine>.pdf file contains all plots. To render single plots as png files for any web output you can use Ghostscript
host:~$ sudo apt-get install ghostscript
host:~$ gs -dNOPAUSE -dBATCH -sDEVICE=png16m -r150 -sOutputFile='page-%00d.png' plots-phyboard-wega-am335x-1.pdf
8.6.4. Add Additional Software for the BSP Image
To add additional software to the image, look at the OpenEmbedded layer index: https://layers.openembedded.org/layerindex/branch/scarthgap/layers/
First, select the Yocto version of the BSP you have from the drop-down list in the top left corner and click Recipes. Now you can search for a software project name and find which layer it is in. In some cases, the program is in meta-openembedded, openembedded-core, or Poky which means that the recipe is already in your build tree. This section describes how to add additional software when this is the case. If the package is in another layer, see the next section.
You can also search the list of available recipes
host:~$ bitbake -s | grep <program name> # fill in program name, like in
host:~$ bitbake -s | grep lsof
When the recipe for the program is already in the Yocto build, you can simply add it by appending a configuration option to your file build/conf/local.conf. The general syntax to add additional software to an image is
# file build/conf/local.conf
IMAGE_INSTALL:append = " <package1> <package2>"
For example, the line
# file build/conf/local.conf
IMAGE_INSTALL:append = " ldd strace file lsof"
installs some helper programs on the target image.
Warning
The leading whitespace is essential for the append command.
All configuration options in local.conf apply to all images. Consequently, the tools are now included in both images phytec-headless-image and phytec-qt6demo-image.
8.6.4.1. Notes about Packages and Recipes
You are adding packages to the IMAGE_INSTALL variable. Those are not necessarily equivalent to the recipes in your meta-layers. A recipe defines per default a package with the same name. But a recipe can set the PACKAGES variable to something different and is able to generate packages with arbitrary names. Whenever you look for software, you have to search for the package name and, strictly speaking, not for the recipe. In the worst case, you have to look at all PACKAGES variables. A tool such as Toaster can be helpful in some cases.
If you can not find your software in the layers provided in the folder sources, see the next section to include another layer into the Yocto build.
References: Yocto dev Documentation - Customizing Yocto builds
8.6.5. Add an Additional Layer
This is a step-by-step guide on how to add another layer to your Yocto build and install additional software from it. As an example, we include the network security scanner nmap in the layer meta-security. First, you must locate the layer on which the software is hosted. Check out the OpenEmbedded MetaData Index and guess a little bit. The network scanner nmap is in the meta-security layer. See meta-security on layers.openembedded.org. To integrate it into the Yocto build, you have to check out the repository and then switch to the correct stable branch. Since the BSP is based on the Yocto Scarthgap build, you should try to use the Scarthgap branch in the layer, too.
host:~$ cd sources
host:~$ git clone git://git.yoctoproject.org/meta-security
host:~$ cd meta-security
host:~$ git branch -r
All available remote branches will show up. Usually there should be ‘sumo’, ‘warrior’, ‘zeus’, ‘dunfell’, ‘hardnkott’, ‘kirkstone’, ‘mickledore’, ‘master’…
host:~$ git checkout scarthgap
Now we add the directory of the layer to the file build/conf/bblayers.conf by appending the line
# file build/conf/bblayers.conf
BBLAYERS += "${BSPDIR}/sources/meta-security"
to the end of the file. After that, you can check if the layer is available in the build configuration by executing
host:~$ bitbake-layers show-layers
If there is an error like
ERROR: Layer 'security' depends on layer 'perl-layer', but this layer is not enabled in your configuration
the layer that you want to add (here meta-security), depends on another layer, which you need to enable first. E.g. the dependency required here is a layer in meta-openembedded (in the PHYTEC BSP it is in the path sources/meta-openembedded/meta-perl/). To enable it, add the following line to build/conf/bblayers.conf
# file build/conf/bblayers.conf
BBLAYERS += "${BSPDIR}/sources/meta-openembedded/meta-perl"
Now the command bitbake-layers show-layers should print a list of all layers enabled including meta-security and meta-perl. After the layer is included, you can install additional software from it as already described above. The easiest way is to add the following line (here is the package nmap)
# file build/conf/local.conf
IMAGE_INSTALL:append = " nmap"
to your build/conf/local.conf. Do not forget to rebuild the image
host:~$ bitbake phytec-qt6demo-image
8.6.6. Create your own layer
Creating your layer should be one of the first tasks when customizing the BSP. You have two basic options. You can either copy and rename our meta-ampliphy, or you can create a new layer that will contain your changes. The better option depends on your use case. meta-ampliphy is our example of how to create a custom Linux distribution that will be updated in the future. If you want to benefit from those changes and are, in general, satisfied with the userspace configuration, it could be the best solution to create your own layer on top of Ampliphy. If you need to rework a lot of information and only need the basic hardware support from PHYTEC, it would be better to copy meta-ampliphy, rename it, and adapt it to your needs. You can also have a look at the OpenEmbedded layer index to find different distribution layers. If you just need to add your own application to the image, create your own layer.
In the following chapter, we have an embedded project called “racer” which we will implement using our Ampliphy Linux distribution. First, we need to create a new layer.
Yocto provides a script for that. If you set up the BSP and the shell is ready, type
host:~$ bitbake-layers create-layer meta-racer
Default options are fine for now. Move the layer to the source directory
host:~$ mv meta-racer ../sources/
Create a Git repository in this layer to track your changes
host:~$ cd ../sources/meta-racer
host:~$ git init && git add . && git commit -s
Now you can add the layer directly to your build/conf/bblayers.conf
BBLAYERS += "${BSPDIR}/sources/meta-racer"
or with a script provided by Yocto
host:~$ bitbake-layers add-layer meta-racer
8.6.7. Kernel and Bootloader Recipe and Version
First, you need to know which kernel and version are used for your target machine. PHYTEC provides multiple kernel recipes linux-mainline, linux-ti and linux-imx. The first one provides support for PHYTEC’s i.MX 6 and AM335x modules and is based on the Linux kernel stable releases from kernel.org. The Git repositories URLs are:
linux-mainline: git://git.phytec.de/linux-mainline
linux-ti: git://git.phytec.de/linux-ti
linux-imx: git://git.phytec.de/linux-imx
barebox: git://git.phytec.de/barebox
u-boot-imx: git://git.phytec.de/u-boot-imx
To find your kernel provider, execute the following command
host:~$ bitbake virtual/kernel -e | grep "PREFERRED_PROVIDER_virtual/kernel"
The command prints the value of the variable PREFERRED_PROVIDER_virtual/kernel. The variable is used in the internal Yocto build process to select the kernel recipe to use. The following lines are different outputs you might see
PREFERRED_PROVIDER_virtual/kernel="linux-mainline"
PREFERRED_PROVIDER_virtual/kernel="linux-ti"
PREFERRED_PROVIDER_virtual/kernel="linux-imx"
To see which version is used, execute bitbake -s. For example
host:~$ bitbake -s | egrep -e "linux-mainline|linux-ti|linux-imx|barebox|u-boot-imx"
The parameter -s prints the version of all recipes. The output contains the recipe name on the left and the version on the right
barebox :2022.02.0-phy1-r7.0
barebox-hosttools-native :2022.02.0-phy1-r7.0
barebox-targettools :2022.02.0-phy1-r7.0
linux-mainline :5.15.102-phy1-r0.0
As you can see, the recipe linux-mainline has version 5.15.102-phy1. In the PHYTEC’s linux-mainline Git repository, you will find a corresponding tag v5.15.102-phy1. The version of the barebox recipe is 2022.02.0-phy1. On i.MX8M* modules the output will contain linux-imx and u-boot-imx.
8.6.8. Kernel and Bootloader Configuration
The bootloader used by PHYTEC, barebox, uses the same build system as the Linux kernel. Therefore, all commands in this section can be used to configure the kernel and bootloader. To configure the kernel or bootloader, execute one of the following commands
host:~$ bitbake -c menuconfig virtual/kernel # Using the virtual provider name
host:~$ bitbake -c menuconfig linux-ti # Or use the recipe name directly
host:~$ bitbake -c menuconfig linux-mainline # Or use the recipe name directly (If you use an i.MX 6 or RK3288 Module)
host:~$ bitbake -c menuconfig linux-imx # Or use the recipe name directly (If you use an i.MX 8M*)
host:~$ bitbake -c menuconfig barebox # Or change the configuration of the bootloader
host:~$ bitbake -c menuconfig u-boot-imx # Or change the configuration of the bootloader (If you use an i.MX 8M*)
After that, you can recompile and redeploy the kernel or bootloader
host:~$ bitbake virtual/kernel -c compile # Or 'barebox' for the bootloader
host:~$ bitbake virtual/kernel -c deploy # Or 'barebox' for the bootloader
Instead, you can also just rebuild the complete build output with
host:~$ bitbake phytec-headless-image # To update the kernel/bootloader, modules and the images
In the last command, you can replace the image name with the name of an image of your choice. The new images and binaries are in build/deploy/images/<machine>/.
Warning
The build configuration is not permanent yet. Executing bitbake virtual/kernel -c clean will remove everything.
To make your changes permanent in the build system, you have to integrate your configuration modifications into a layer. For the configuration you have two options:
Include only a configuration fragment (a minimal diff between the old and new configuration)
Complete default configuration (defconfig) after your modifications.
Having a set of configuration fragments makes what was changed at which stage more transparent. You can turn on and off the changes, you can manage configurations for different situations and it helps when porting changes to new kernel versions. You can also group changes together to reflect specific use cases. A fully assembled kernel configuration will be deployed in the directory build/deploy/images/<machine>. If you do not have any of those requirements, it might be simpler to just manage a separate defconfig file.
8.6.8.1. Add a Configuration Fragment to a Recipe
The following steps can be used for both kernel and bootloader. Just replace the recipe name linux-mainline in the commands with linux-ti, or barebox for the bootloader. If you did not already take care of this, start with a clean build. Otherwise, the diff of the configuration may be wrong
host:~$ bitbake linux-mainline -c clean
host:~$ bitbake linux-mainline -c menuconfig
Make your configuration changes in the menu and generate a config fragment
host:~$ bitbake linux-mainline -c diffconfig
which prints the path of the written file
Config fragment has been dumped into:
/home/<path>/build/tmp/work/phyboard_mira_imx6_11-phytec-linux-gnueabi/linux-mainline/4.19.100-phy1-r0.0/fragment.cfg
All config changes are in the file fragment.cfg which should consist of only some lines. The following example shows how to create a bbappend file and how to add the necessary lines for the config fragment. You just have to adjust the directories and names for the specific recipe: linux-mainline, linux-ti, linux-imx, u-boot-imx, or barebox.
sources/<layer>/recipes-kernel/linux/linux-mainline_%.bbappend # For the recipe linux-mainline
sources/<layer>/recipes-kernel/linux/linux-ti_%.bbappend # For the recipe linux-ti
sources/<layer>/recipes-kernel/linux/linux-imx_%.bbappend # For the recipe linux-imx
sources/<layer>/recipes-bsp/barebox/barebox_%.bbappend # For the recipe barebox
sources/<layer>/recipes-bsp/u-boot/u-boot-imx_%.bbappend # For the recipe u-boot-imx
Replace the string layer with your own layer created as shown above (e.g. meta-racer), or just use meta-ampliphy. To use meta-ampliphy, first, create the directory for the config fragment and give it a new name (here enable-r8169.cfg) and move the fragment to the layer.
host:~$ mkdir -p sources/meta-ampliphy/recipes-kernel/linux/features
# copy the path from the output of *diffconfig*
host:~$ cp /home/<path>/build/tmp/work/phyboard_mira_imx6_11-phytec-linux-gnueabi/linux-mainline/4.19.100-phy1-r0.0/fragment.cfg \
sources/meta-ampliphy/recipes-kernel/linux/features/enable-r8169.cfg
Then open the bbappend file (in this case sources/meta-ampliphy/recipes-kernel/linux/linux-mainline_%.bbappend ) with your favorite editor and add the following lines
# contents of the file linux-mainline_%.bbappend
FILESEXTRAPATHS:prepend := "${THISDIR}/features:"
SRC_URI:append = " \
file://enable-r8169.cfg \
"
Warning
Do not forget to use the correct bbappend filenames: linux-ti_%.bbappend for the linux-ti recipe and barebox_%.bbappend for the bootloader in the folder recipes-bsp/barebox/ !
After saving the bbappend file, you have to rebuild the image. Yocto should pick up the recipe changes automatically and generate a new image
host:~$ bitbake phytec-headless-image # Or another image name
8.6.8.2. Add a Complete Default Configuration (defconfig) to a Recipe
This approach is similar to the one above, but instead of adding a fragment, a defconfig is used. First, create the necessary folders in the layer you want to use, either your own layer or meta-ampliphy
host:~$ mkdir -p sources/meta-ampliphy/recipes-kernel/linux/features/ # For both linux-mainline and linux-ti
host:~$ mkdir -p sources/meta-ampliphy/recipes-bsp/barebox/features/ # Or for the bootloader
Then you have to create a suitable defconfig file. Make your configuration changes using menuconfig and then save the defconfig file to the layer
host:~$ bitbake linux-mainline -c menuconfig # Or use recipe name linux-ti or barebox
host:~$ bitbake linux-mainline -c savedefconfig # Create file 'defconfig.temp' in the work directory
This will print the path to the generated file
Saving defconfig to ..../defconfig.temp
Then, as above, copy the generated file to your layer, rename it to defconfig, and add the following lines to the bbappend file (here sources/meta-ampliphy/recipes-kernel/linux/linux-mainline_%.bbappend)
# contents of the file linux-mainline_%.bbappend
FILESEXTRAPATHS:prepend := "${THISDIR}/features:"
SRC_URI:append = " \
file://defconfig \
"
Tip
Do not forget to use the correct bbappend filenames: linux-ti_%.bbappend for the linux-ti recipe and barebox_%.bbappend for the bootloader in the folder recipes-bsp/barebox/ !
After that, rebuild your image as the changes are picked up automatically
host:~$ bitbake phytec-headless-image # Or another image name
8.6.9. Patch the Kernel or Bootloader with devtool
Apart from using the standard versions of kernel and bootloader which are provided in the recipes, you can modify the source code or use our own repositories to build your customized kernel.
PRO |
CON |
Standard workflow of the official Yocto documentation |
Uses additional hard drive space as the sources get duplicated |
Toolchain does not have to recompile everything |
No optimal cache usage, build overhead |
Devtool is a set of helper scripts to enhance the user workflow of Yocto. It was integrated with version 1.8. It is available as soon as you set up your shell environment. Devtool can be used to:
modify existing sources
integrate software projects into your build setup
build software and deploy software modifications to your target
Here we will use devtool to patch the kernel. We use linux-mainline as an example for the AM335x Kernel. The first command we use is devtool modify - x <recipe> <directory>
host:~$ devtool modify -x linux-mainline linux-mainline
Devtool will create a layer in build/workspace where you can see all modifications done by devtool . It will extract the sources corresponding to the recipe to the specified directory. A bbappend will be created in the workspace directing the SRC_URI to this directory. Building an image with Bitbake will now use the sources in this directory. Now you can modify lines in the kernel
host:~$ vim linux-mainline/arch/arm/boot/dts/am335x-phycore-som.dtsi
-> make a change
host:~$ bitbake phytec-qt6demo-image
Your changes will now be recompiled and added to the image. If you want to store your changes permanently, it is advisable to create a patch from the changes, then store and backup only the patch. You can go into the linux-mainline directory and create a patch using Git. How to create a patch is described in Patch the Kernel or Bootloader using the “Temporary Method” and is the same for all methods.
If you want to learn more about devtool, visit:
8.6.10. Patch the Kernel or Bootloader using the “Temporary Method”
PRO |
CON |
No overhead, no extra configuration |
Changes are easily overwritten by Yocto (Everything is lost!!). |
Toolchain does not have to recompile everything |
It is possible to alter the source code before Bitbake configures and compiles the recipe. Use Bitbake’ s devshell command to jump into the source directory of the recipe. Here is the barebox recipe
host:~$ bitbake barebox -c devshell # or linux-mainline, linux-ti, linux-imx, u-boot-imx
After executing the command, a shell window opens. The current working directory of the shell will be changed to the source directory of the recipe inside the tmp folder. Here you can use your favorite editor, e.g. vim, emacs, or any other graphical editor, to alter the source code. When you are finished, exit the devshell by typing exit or hitting CTRL-D.
After leaving the devshell you can recompile the package
host:~$ bitbake barebox -c compile --force # or linux-mainline, linux-ti, linux-imx, u-boot-imx
The extra argument ‘–force’ is important because Yocto does not recognize that the source code was changed.
Tip
You cannot execute the bitbake command in the devshell . You have to leave it first.
If the build fails, execute the devshell command again and fix it. If the build is successful, you can deploy the package and create a new SD card image
host:~$ bitbake barebox -c deploy # new barebox in e.g. deploy/images/phyflex-imx6-2/barebox.bin
host:~$ bitbake phytec-headless-image # new WIC image in e.g. deploy/images/phyflex-imx6-2/phytec-headless-image-phyflex-imx6-2.wic
Warning
If you execute a clean e.g bitbake barebox -c clean , or if Yocto fetches the source code again, all your changes are lost!!!
To avoid this, you can create a patch and add it to a bbappend file. It is the same workflow as described in the section about changing the configuration.
You have to create the patch in the devshell if you use the temporary method and in the subdirectory created by devtool if you used devtool.
host:~$ bitbake barebox -c devshell # Or linux-mainline, linux-ti
host(devshell):~$ git status # Show changes files
host(devshell):~$ git add <file> # Add a special file to the staging area
host(devshell):~$ git commit -m "important modification" # Creates a commit with a not so useful commit message
host(devshell):~$ git format-patch -1 -o ~/ # Creates a patch of the last commit and saves it in your home folder
/home/<user>/0001-important-modification.patch # Git prints the path of the written patch file
host(devshell):~$ exit
After you have created the patch, you must create a bbappend file for it. The locations for the three different recipes - linux-mainline , linux-ti , and barebox - are
sources/<layer>/recipes-kernel/linux/linux-mainline_%.bbappend # For the recipe linux-mainline
sources/<layer>/recipes-kernel/linux/linux-ti_%.bbappend # For the recipe linux-ti
sources/<layer>/recipes-kernel/linux/linux-imx_%.bbappend # For the recipe linux-imx
sources/<layer>/recipes-bsp/barebox/barebox_%.bbappend # For the recipe barebox
sources/<layer>/recipes-bsp/u-boot/u-boot-imx_%.bbappend # For the recipe u-boot-imx
The following example is for the recipe barebox. You have to adjust the paths. First, create the folders and move the patch into them. Then create the bbappend file
host:~$ mkdir -p sources/meta-ampliphy/recipes-bsp/barebox/features # Or use your own layer instead of *meta-ampliphy*
host:~$ cp ~/0001-important-modification.patch sources/meta-ampliphy/recipes-bsp/barebox/features # copy patch
host:~$ touch sources/meta-ampliphy/recipes-bsp/barebox/barebox_%.bbappend
Tip
Pay attention to your current work directory. You have to execute the commands in the BSP top-level directory. Not in the build directory!
After that use your favorite editor to add the following snipped into the bbappend file (here sources/meta-ampliphy/recipes-bsp/barebox/barebox_%.bbappend)
# contents of the file barebox_%.bbappend
FILESEXTRAPATHS:prepend := "${THISDIR}/features:"
SRC_URI:append = " \
file://0001-important-modification.patch \
"
Save the file and rebuild the barebox recipe with
host:~$ bitbake barebox -c clean # Or linux-ti, linux-mainline, linux-imx, u-boot-imx
host:~$ bitbake barebox
If the build is successful, you can rebuild the final image with
host:~$ bitbake phytec-headless-image # Or another image name
Further Resources:
The Yocto Project has some documentation for software developers. Check the ‘Kernel Development Manual’ for more information about how to configure the kernel. Please note that not all of the information from the Yocto manual can be applied to the PHYTEC BSP as we use the classic kernel approach of Yocto and most of the documentation assumes the Yocto kernel approach.
8.6.11. Working with the Kernel and Bootloader using SRC_URI in local.conf
Here we present a third option to make kernel and bootloader changes. You have external checkouts of the linux-mainline, linux-ti, or barebox Git repositories. You will overwrite the URL of the source code fetcher, the variable SRC_URI, to point to your local checkout instead of the remote repositories.
PRO |
CON |
All changes are saved with Git |
Many working directories in build/tmp-glibc/work/<machine>/<package>/ |
You have to commit every change before recompiling |
|
For each change, the toolchain compiles everything from scratch (avoidable with ccache) |
First, you need a local clone of the Git repository barebox or kernel. If you do not have one, use the commands
host:~$ mkdir ~/git
host:~$ cd ~/git
host:~$ git clone git://git.phytec.de/barebox
host:~$ cd barebox
host:~$ git checkout -b v2022.02.0-phy remotes/origin/v2022.02.0-phy
Add the following snippet to the file build/conf/local.conf
# Use your own path to the git repository
# NOTE: Branch name in variable "BRANCH_pn-barebox" should be the same as the
# branch which is used in the repository folder. Otherwise your commits won't be recognized later.
BRANCH:pn-barebox = "v2022.02.0-phy"
SRC_URI:pn-barebox = "git:///${HOME}/git/barebox;branch=${BRANCH}"
SRCREV:pn-barebox = "${AUTOREV}"
You also have to set the correct BRANCH name in the file. Either you create your own branch in the Git repository, or you use the default (here “v2015.02.0-phy”). Now you should recompile barebox from your own source
host:~$ bitbake barebox -c clean
host:~$ bitbake barebox -c compile
The build should be successful because the source was not changed yet.
You can alter the source in ~/git/barebox or the default defconfig (e.g. ~/git/barebox/arch/arm/configs/imx_v7_defconfig). After you are satisfied with your changes, you have to make a dummy commit for Yocto. If you do not, Yocto will not notice that the source code was modified in your repository folder (e.g. ~/git/barebox/)
host:~$ git status # show modified files
host:~$ git diff # show changed lines
host:~$ git commit -a -m "dummy commit for yocto" # This command is important!
Try to compile your new changes. Yocto will automatically notice that the source code was changed and fetches and configures everything from scratch.
host:~$ bitbake barebox -c compile
If the build fails, go back to the source directory, fix the problem, and recommit your changes. If the build was successful, you can deploy barebox and even create a new SD card image.
host:~$ bitbake barebox -c deploy # new barebox in e.g. deploy/images/phyflex-imx6-2/barebox-phyflex-imx6-2.bin
host:~$ bitbake phytec-headless-image # new sd-card image in e.g. deploy/images/phyflex-imx6-2/phytec-headless-image-phyflex-imx6-2.wic
If you want to make additional changes, just make another commit in the repository and rebuild barebox again.
8.6.12. Add Existing Software with “Sustainable Method”
Now that you have created your own layer, you have a second option to add existing software to existing image definitions. Our standard image is defined in meta-ampliphy
meta-ampliphy/recipes-images/images/phytec-headless-image.bb
In your layer, you can now modify the recipe with a bbappend without modifying any BSP code
meta-racer/recipes-images/images/phytec-headless-image.bbappend
The append will be parsed together with the base recipe. As a result, you can easily overwrite all variables set in the base recipe, which is not always what you want. If we want to include additional software, we need to append it to the IMAGE_INSTALL variable
IMAGE_INSTALL:append = " rsync"
8.6.13. Add Linux Firmware Files to the Root Filesystem
It is a common task to add an extra firmware file to your root filesystem into /lib/firmware/. For example, WiFi adapters or PCIe Ethernet cards might need proprietary firmware. As a solution, we use a bbappend in our layer. To create the necessary folders, bbappend and copy the firmware file type
host:~$ cd meta-racer # go into your layer
host:~$ mkdir -p recipes-kernel/linux-firmware/linux-firmware/
host:~$ touch recipes-kernel/linux-firmware/linux-firmware_%.bbappend
host:~$ cp ~/example-firmware.bin recipes-kernel/linux-firmware/linux-firmware/ # adapt filename
Then add the following content to the bbappend file and replace every occurrence of example-firmware.bin with your firmware file name.
# file recipes-kernel/linux-firmware/linux-firmware_%.bbappend
FILESEXTRAPATHS:prepend := "${THISDIR}/linux-firmware:"
SRC_URI += "file://example-firmware.bin"
do_install:append () {
install -m 0644 ${WORKDIR}/example-firmware.bin ${D}/lib/firmware/example-firmware.bin
}
# NOTE: Use "=+" instead of "+=". Otherwise file is placed into the linux-firmware package.
PACKAGES =+ "${PN}-example"
FILES:${PN}-example = "/lib/firmware/example-firmware.bin"
Now try to build the linux-firmware recipe
host:~$ . sources/poky/oe-init-build-env
host:~$ bitbake linux-firmware
This should generate a new package deploy/ipk/all/linux-firmware-example.
As the final step, you have to install the firmware package to your image. You can do that in your local.conf or image recipe via
# file local.conf or image recipe
IMAGE_INSTALL += "linux-firmware-example"
Warning
Ensure that you have adapted the package name linux-firmware-example with the name you assigned in linux-firmware_%.bbappend.
8.6.14. Change the u-boot Environment via bbappend Files
All i.MX8M* products use the u-boot bootloader. The u-boot environment can be modified using the Temporary Method. In the u-boot-imx sources modify the header file corresponding to the processor located in include/configs/phycore_imx8m*. New environment variables should be added at the end of CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
[...]
PHYCORE_FITIMAGE_ENV_BOOTLOGIC \
"newvariable=1\0"
Commit the changes and and create the file u-boot-imx_%.bbappend in your layer at <layer>/recipes-bsp/u-boot/u-boot-imx_%.bbappend
# contents of the file u-boot-imx_%.bbappend
FILESEXTRAPATHS:prepend := "${THISDIR}/features:"
SRC_URI:append = " \
file://0001-environment-addition.patch \
"
8.6.15. Change the barebox Environment via bbappend Files
Since BSP-Yocto-AM335x-16.2.0 and BSP-Yocto-i.MX6-PD16.1.0, the barebox environment handling in meta-phytec has changed. Now it is possible to add, change, and remove files in the barebox environment via the Python bitbake task do_env. There are two Python functions to change the environment. Their signatures are:
env_add(d, ***filename as string*, ***file content as string*): to add a new file or overwrite an existing file
env_rm(d, ***filename as string*): to remove a file
The first example of a bbappend file in the custom layer meta-racer shows how to add a new non-volatile variable linux.bootargs.fb in the barebox environment folder /env/nv/
# file meta-racer/recipes-bsp/barebox/barebox_2022.02.0-phy1.bbappend
python do_env:append() {
env_add(d, "nv/linux.bootargs.fb", "imxdrm.legacyfb_depth=32\n")
}
The next example shows how to replace the network configuration file /env/network/eth0
# file meta-racer/recipes-bsp/barebox/barebox_2022.02.0-phy1.bbappend
python do_env:append() {
env_add(d, "network/eth0",
"""#!/bin/sh
# ip setting (static/dhcp)
ip=static
global.dhcp.vendor_id=barebox-${global.hostname}
# static setup used if ip=static
ipaddr=192.168.178.5
netmask=255.255.255.0
gateway=192.168.178.1
serverip=192.168.178.1
""")
}
In the above example, the Python multiline string syntax “”” text “”” is used to avoid adding multiple newline characters \n into the recipe Python code. The Python function env_add can add and overwrite environment files.
The next example shows how to remove an already added environment file, for example , /env/boot/mmc
# file meta-racer/recipes-bsp/barebox/barebox_2022.02.0-phy1.bbappend
python do_env:append() {
env_rm(d, "boot/mmc")
}
8.6.15.1. Debugging the Environment
If you want to see all environment files that are added in the build process, you can enable a debug flag in the local.conf
# file local.conf
ENV_VERBOSE = "1"
After that, you have to rebuild the barebox recipe to see the debugging output
host:~$ bitbake barebox -c clean
host:~$ bitbake barebox -c configure
The output of the last command looks like this
[...]
WARNING: barebox-2022.02.0-phy1-r7.0 do_env_write: File 'nv/allow_color' content "false"
WARNING: barebox-2022.02.0-phy1-r7.0 do_env_write: File 'nv/linux.bootargs.base' content "consoleblank=0"
WARNING: barebox-2022.02.0-phy1-r7.0 do_env_write: File 'nv/linux.bootargs.fb' content "imxdrm.legacyfb_depth=32"
WARNING: barebox-2022.02.0-phy1-r7.0 do_env_write: File 'nv/linux.bootargs.rootfs' content "rootwait ro fsck.repair=yes"
8.6.15.2. Changing the Environment (depending on Machines)
If you need to apply some barebox environment modifications only to a single or only a few machines, you can use Bitbake’ s machine overwrite syntax. For the machine overwrite syntax, you append a machine name or SoC name (such as mx6 , ti33x, or rk3288 ) with an underscore to a variable or task
DEPENDS:remove:mx6 = "virtual/libgl" or
python do_env_append_phyboard-mira-imx6-4().
The next example adds the environment variables only if the MACHINE is set to phyboard-mira-imx6-4
# file meta-phytec/recipes-bsp/barebox/barebox_2022.02.0-phy1.bbappend
python do_env:append:phyboard-mira-imx6-4() {
env_add(d, "nv/linux.bootargs.cma", "cma=64M\n")
}
Bitbake’s override syntax for variables is explained in more detail at: https://docs.yoctoproject.org/bitbake/2.4/bitbake-user-manual/bitbake-user-manual-metadata.html#conditional-metadata
8.6.15.3. Upgrading the barebox Environment from Previous BSP Releases
Prior to BSP version BSP-Yocto-AM335x-16.2.0 and BSP-Yocto-i.MX6-PD16.1.0 , barebox environment changes via bbappend file were done differently. For example, the directory structure in your meta layer (here meta-skeleton ) may have looked like this
host:~$ tree -a sources/meta-skeleton/recipes-bsp/barebox/
sources/meta-skeleton/recipes-bsp/barebox
├── barebox
│ └── phyboard-wega-am335x-3
│ ├── boardenv
│ │ └── .gitignore
│ └── machineenv
│ └── nv
│ └── linux.bootargs.cma
└── barebox_%.bbappend
and the file barebox_%.bbappend contained
# file sources/meta-skeleton/recipes-bsp/barebox/barebox_%.bbappend
FILESEXTRAPATHS:prepend := "${THISDIR}/barebox:"
In this example, all environment changes from the directory boardenv in the layer meta-phytec are ignored and the file nv/linux.bootargs.cma is added. For the new handling of the barebox environment, you use the Python functions env_add and env_rm in the Python task do_env. Now the above example translates to a single Python function in the file barebox_%.bbappend that looks like
# file sources/meta-skeleton/recipes-bsp/barebox/barebox_%.bbappend
FILESEXTRAPATHS:prepend := "${THISDIR}/barebox:"
python do_env:append() {
# Removing files (previously boardenv)
env_rm(d, "config-expansions")
# Adding new files (previously machineenv)
env_add(d, "nv/linux.bootargs.cma", "cma=64M\n")
}
8.6.16. Changing the Network Configuration
To tweak IP addresses, routes, and gateways at runtime you can use the tools ifconfig and ip . Some examples
target:~$ ip addr # Show all network interfaces
target:~$ ip route # Show all routes
target:~$ ip addr add 192.168.178.11/24 dev eth0 # Add static ip and route to interface eth0
target:~$ ip route add default via 192.168.178.1 dev eth0 # Add default gateway 192.168.178.1
target:~$ ip addr del 192.168.178.11/24 dev eth0 # Remove static ip address from interface eth0
The network configuration is managed by systemd-networkd . To query the current status use
target:~$ networkctl status
target:~$ networkctl list
The network daemon reads its configuration from the directories /etc/systemd/network/ , /run/systemd/network/ , and /lib/systemd/network/ (from higher to lower priority). A sample configuration in /lib/systemd/network/10-eth0.network looks like this
# file /lib/systemd/network/10-eth0.network
[Match]
Name=eth0
[Network]
Address=192.168.3.11/24
Gateway=192.168.3.10
These files *.network replace /etc/network/interfaces from other distributions. You can either edit the file 10-eth0.network in-place or copy it to /etc/systemd/network/ and make your changes there. After changing a file you must restart the daemon to apply your changes
target:~$ systemctl restart systemd-networkd
To see the syslog message of the network daemon, use
target:~$ journalctl --unit=systemd-networkd.service
To modify the network configuration at build time, look at the recipe sources/meta-ampliphy/recipes-core/systemd/systemd-machine-units.bb and the interface files in the folder meta-ampliphy/recipes-core/systemd/systemd-machine-units/ where the static IP address configuration for eth0 (and optionally eth1) is done.
For more information, see https://wiki.archlinux.org/title/Systemd-networkd and https://www.freedesktop.org/software/systemd/man/latest/systemd.network.html.
8.6.17. Changing the Wireless Network Configuration
8.6.17.1. Connecting to a WLAN Network
First set the correct regulatory domain for your country
target:~$ iw reg set DE
target:~$ iw reg get
You will see
country DE: DFS-ETSI
(2400 - 2483 @ 40), (N/A, 20), (N/A)
(5150 - 5250 @ 80), (N/A, 20), (N/A), NO-OUTDOOR
(5250 - 5350 @ 80), (N/A, 20), (0 ms), NO-OUTDOOR, DFS
(5470 - 5725 @ 160), (N/A, 26), (0 ms), DFS
(57000 - 66000 @ 2160), (N/A, 40), (N/A)
Set up the wireless interface
target:~$ ip link # list all interfaces. Search for wlan*
target:~$ ip link set up dev wlan0
Now you can scan for available networks
target:~$ iw wlan0 scan | grep SSID
You can use a cross-platform supplicant with support for WEP, WPA, and WPA2 called wpa_supplicant for an encrypted connection.
To do so, add the network credentials to the file /etc/wpa_supplicant.conf
Confluence country=DE network={ ssid="<SSID>" proto=WPA2 psk="<KEY>" }
Now a connection can be established
target:~$ wpa_supplicant -Dnl80211 -c/etc/wpa_supplicant.conf -iwlan0 -B
This should result in the following output
ENT-CONNECTED - Connection to 88:33:14:5d:db:b1 completed [id=0 id_str=]
To finish the configuration you can configure DHCP to receive an IP address (supported by most WLAN access points). For other possible IP configurations, see the section Changing the Network Configuration.
First, create the directory
target:~$ mkdir -p /etc/systemd/network/
Then add the following configuration snippet in /etc/systemd/network/10-wlan0.network
# file /etc/systemd/network/10-wlan0.network
[Match]
Name=wlan0
[Network]
DHCP=yes
Now, restart the network daemon so that the configuration takes effect
target:~$ systemctl restart systemd-networkd
8.6.17.2. Creating a WLAN Access Point
This section provides a basic access point (AP) configuration for a secured WPA2 network.
Find the name of the WLAN interface with
target:~$ ip link
Edit the configuration in /etc/hostapd.conf. It is strongly dependent on the use case. The following shows an example
# file /etc/hostapd.conf
interface=wlan0
driver=nl80211
ieee80211d=1
country_code=DE
hw_mode=g
ieee80211n=1
ssid=Test-Wifi
channel=2
wpa=2
wpa_passphrase=12345678
wpa_key_mgmt=WPA-PSK
wpa_pairwise=CCMP
Set up and start the DHCP server for the network interface wlan0 via systemd-networkd
target:~$ mkdir -p /etc/systemd/network/
target:~$ vi /etc/systemd/network/10-wlan0.network
Insert the following text into the file
[Match]
Name=wlan0
[Network]
Address=192.168.0.1/24
DHCPServer=yes
[DHCPServer]
EmitDNS=yes
target:~$ systemctl restart systemd-networkd
target:~$ systemctl status systemd-networkd -l # check status and see errors
Start the userspace daemon hostapd
target:~$ systemctl start hostapd
target:~$ systemctl status hostapd -l # check for errors
Now, you should see the WLAN network Test-Wifi on your terminal device (laptop, smartphone, etc.).
If there are problems with the access point, you can either check the log messages with
target:~$ journalctl --unit=hostapd
or start the daemon in debugging mode from the command line
target:~$ systemctl stop hostapd
target:~$ hostapd -d /etc/hostapd.conf -P /var/run/hostapd.pid
You should see
...
wlan0: interface state UNINITIALIZED->ENABLED
wlan0: AP-ENABLED
Further information about AP settings and the userspace daemon hostapd can be found at
https://wireless.wiki.kernel.org/en/users/documentation/hostapd
https://w1.fi/hostapd/
8.6.17.3. phyCORE-i.MX 6UL/ULL Bluetooth
Special consideration must be paid when working with any Bluetooth on a phyCORE-i.MX 6UL/ULL. For further information, please check L-844e.A5 i.MX 6UL/ULL BSP Manual - Bluetooth.
8.6.18. Add OpenCV Libraries and Examples
OpenCV (Opensource Computer Vision https://opencv.org/) is an open-source library for computer vision applications.
To install the libraries and examples edit the file conf/local.conf in the Yocto build system and add
# file conf/local.conf
# Installing OpenCV libraries and examples
LICENSE_FLAGS_ACCEPTED += "commercial_libav"
LICENSE_FLAGS_ACCEPTED += "commercial_x264"
IMAGE_INSTALL:append = " \
opencv \
opencv-samples \
libopencv-calib3d2.4 \
libopencv-contrib2.4 \
libopencv-core2.4 \
libopencv-flann2.4 \
libopencv-gpu2.4 \
libopencv-highgui2.4 \
libopencv-imgproc2.4 \
libopencv-legacy2.4 \
libopencv-ml2.4 \
libopencv-nonfree2.4 \
libopencv-objdetect2.4 \
libopencv-ocl2.4 \
libopencv-photo2.4 \
libopencv-stitching2.4 \
libopencv-superres2.4 \
libopencv-video2.4 \
libopencv-videostab2.4 \
"
Then rebuild your image
host:~$ bitbake phytec-qt6demo-image
Tip
Most examples do not work out of the box, because they depend on the GTK graphics library. The BSP only supports Qt6 .
8.6.19. Add Minimal PHP web runtime with lightpd
This is one example of how to add a small runtime for PHP applications and a web server on your target. Lighttpd can be used together with the PHP command line tool over cgi. This solution weights only 5.5 MiB of disk storage. It is already preconfigured in meta-ampliphy. Just modify the build configuration to install it on the image
# file conf/local.conf
# install lighttpd with php cgi module
IMAGE_INSTALL:append = " lighttpd"
After booting the image, you should find the example web content in /www/pages . For testing php, you can delete the index.html and replace it with a index.php file
<html>
<head>
<title>PHP-Test</title>
</head>
<body>
<?php phpinfo(); ?>
</body>
</html>
On your host, you can point your browser to the board’s IP, (e.g. 192.168.3.11) and the phpinfo should show up.
8.7. Common Tasks
8.7.1. Debugging a User Space Application
The phytec-qt6demo-image can be cross-debugged without any change. For cross-debugging, you just have to match the host sysroot with the image in use. So you need to create a toolchain for your image
host:~$ bitbake -c populate_sdk phytec-qt6demo-image
Additionally, if you want to have full debug and backtrace capabilities for all programs and libraries in the image, you could add
DEBUG_BUILD = "1"
to the conf/local.conf. This is not necessary in all cases. The compiler
options will then be switched from FULL_OPTIMIZATION to DEBUG_OPTIMIZATION. Look
at the Poky source code for the default assignment of DEBUG_OPTIMIZATION.
To start a cross debug session, install the SDK as mentioned previously, source the SDK environment, and run Qt Creator in the same shell. If you do not use Qt Creator, you can directly call the arm-<..>-gdb debugger instead which should be in your path after sourcing the environment script.
If you work with Qt Creator, have a look at the appropriate documentation delivered with your product (either QuickStart or Application Guide) for information on how to set up the toolchain.
When starting the debugger with your userspace application you will get a SIGILL, an illegal instruction from the libcrypto. Openssl probes for the system capabilities by trapping illegal instructions, which will trigger GDB. You can ignore this and hit Continue (c command). You can permanently ignore this stop by adding
handle SIGILL nostop
to your GDB startup script or in the Qt Creator GDB configuration panel. Secondly, you might need to disable a security feature by adding
set auto-load safe-path /
to the same startup script, which will enable the automatic loading of libraries from any location.
If you need to have native debugging, you might want to install the debug symbols on the target. You can do this by adding the following line to your conf/local.conf
EXTRA_IMAGE_FEATURES += "dbg-pkgs"
For cross-debugging, this is not required as the debug symbols will be loaded from the host side and the dbg-pkgs are included in the SDK of your image anyway.
8.7.2. Generating Source Mirrors, working Offline
Modify your site.conf (or local.conf if you do not use a site.conf ) as follows
#DL_DIR ?= "" don't set it! It will default to a directory inside /build
SOURCE_MIRROR_URL = "file:///home/share/yocto_downloads/"
INHERIT += "own-mirrors"
BB_GENERATE_MIRROR_TARBALLS = "1"
Now run
host:~$ bitbake --runall=fetch <image>
for all images and for all machines you want to provide sources for. This will create all the necessary tar archives. We can remove all SCM subfolders, as they are duplicated with the tarballs
host:~$ rm -rf build/download/git2/
etc...
Please consider that we used a local source mirror for generating the dl_dir. Because of that, some archives will be linked locally.
First, we need to copy all files, resolving symbolic links into the new mirror directory
host:~$ rsync -vaL <dl_dir> ${TOPDIR}/../src_mirror/
Now we clean the /build directory by deleting everything except /build/conf/ but including /build/conf/sanity. We change site.conf as follows
SOURCE_MIRROR_URL = "file://${TOPDIR}/../src_mirror"
INHERIT += "own-mirrors"
BB_NO_NETWORK = "1"
SCONF_VERSION = "1"
The BSP directory can now be compressed with
host:~$ tar cfJ <filename>.tar.xz <folder>
where filename and folder should be the full BSP Name.
8.7.3. Compiling on the Target
To your local.conf add
IMAGE_FEATURES:append = " tools-sdk dev-pkgs"
8.7.4. Different Toolchains
There are several ways to create a toolchain installer in Poky. One option is to run
host:~$ bitbake meta-toolchain
This will generate a toolchain installer in build/deploy/sdk which can be used for cross-compiling of target applications. However, the installer does not include libraries added to your image, so it is a bare GCC compiler only. This is suited for bootloader and kernel development.
Another you can run is
host:~$ bitbake -c populate_sdk <your_image>
This will generate a toolchain installer containing all necessary development packages of the software installed on the root filesystem of the target. This installer can be handed over to the user space application development team and includes all necessary parts to develop an application. If the image contains the QT libraries, all of those will be available in the installer too.
The third option is to create the ADT (Application Development Toolkit) installer. It will contain the cross-toolchain and some tools to aid the software developers, for example, an Eclipse plugin and a QEMU target simulator.
host:~$ bitbake adt-installer
The ADT is untested for our BSP at the moment.
8.7.4.1. Using the SDK
After generating the SDK with
host:~$ source sources/poky/oe-init-build-env
host:~$ bitbake -c populate_sdk phytec-qt6demo-image # or another image
run the generated binary with
host:~$ deploy/sdk/ampliphy-glibc-x86_64-phytec-qt6demo-image-cortexa9hf-vfp-neon-toolchain-i.MX6-PD15.3-rc.sh
Enter target directory for SDK (default: /opt/ampliphy/i.MX6-PD15.3-rc):
You are about to install the SDK to "/opt/ampliphy/i.MX6-PD15.3-rc". Proceed[Y/n]?
Extracting SDK...done
Setting it up...done
SDK has been successfully set up and is ready to be used.
You can activate the toolchain for your shell by sourcing the file environment-setup in the toolchain directory
host:~$ source /opt/ampliphy/i.MX6-PD15.3-rc/environment-setup-cortexa9hf-vfp-neon-phytec-linux-gnueabi
Note
To be able to build a Qt6 application with the SDK and the Meson Build system, the following has to be done, after the SDK has been sourced:
host:~$ export PATH=$OECORE_NATIVE_SYSROOT/usr/libexec:$PATH
Then the necessary tools like the cross compiler and linker are in your PATH. To compile a simple C program, use
host:~$ $CC main.c -o main
The environment variable $CC contains the path to the ARM cross compiler and other compiler arguments needed like -march , -sysroot and –mfloat-abi.
Tip
You cannot compile programs only with the compiler name like
host:~$ arm-phytec-linux-gnueabi-gcc main.c -o main
It will fail in many cases. Always use CC, CFLAGS, LDFLAGS, and so on.
For convenience, the environment-setup exports other environment variables like CXX, LD, SDKTARGETSYSROOT.
A simple makefile compiling a C and C++ program may look like this
# Makefile
TARGETS=c-program cpp-program
all: $(TARGETS)
c-program: c-program.c
$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@
cpp-program: cpp-program.cpp
$(CXX) $(CXXFLAGS) $(LDFLAGS) $< -o $@
.PHONY: clean
clean:
rm -f $(TARGETS)
To compile for the target, just source the toolchain in your shell before executing make
host:~$ make # Compiling with host CC, CXX for host architecture
host:~$ source /opt/ampliphy/i.MX6-PD15.3-rc/environment-setup-cortexa9hf-vfp-neon-phytec-linux-gnueabi
host:~$ make # Compiling with target CC, CXX for target architecture
If you need to specify additionally included directories in the sysroot of the toolchain, you can use an ‘=’ sign in the -I argument like
-I=/usr/include/SDL
GCC replaces it by the sysroot path (here /opt/ampliphy/i.MX6-PD15.3-rc/sysroots/cortexa9hf-vfp-neon-phytec-linux-gnueabi/). See the main page of GCC for more information.
Tip
The variables $CFLAGS and $CXXFLAGS contain the compiler debug flag ‘-g’ by default. This includes debugging information in the binary and making it bigger. Those should be removed from the production image. If you create a Bitbake recipe, the default behavior is to turn on ‘-g’ too. The debugging symbols are used in the SDK rootfs to be able to get debugging information when invoking GDB from the host. Before installing the package to the target rootfs, Bitbake will invoke strip on the program which removes the debugging symbols. By default, they are not found nor required on the target root filesystem
8.7.4.2. Using the SDK with GNU Autotools
Yocto SDK is a straightforward tool for a project that uses the GNU Autotools. The traditional compile steps for the host are usually
host:~$ ./autogen.sh # maybe not needed
host:~$ ./configure
host:~$ make
host:~$ make install DESTDIR=$PWD/build/
The commands to compile for the target machine with the Yocto SDK are quite similar. The following commands assume that the SDK was unpacked to the directory /opt/phytec-ampliphy/i.MX6-PD15.3.0/ (adapt the path as needed)
host:~$ source /opt/phytec-ampliphy/i.MX6-PD15.3.0/environment-setup-cortexa9hf-vfp-neon-phytec-linux-gnueabi
host:~$ ./autogen.sh # maybe not needed
host:~$ ./configure ${CONFIGURE_FLAGS}
host:~$ make
host:~$ make install DESTDIR=$PWD/build/
Refer to the official Yocto documentation for more information: https://docs.yoctoproject.org/dev/singleindex.html#autotools-based-projects
8.7.5. Working with Kernel Modules
You will come to the point where you either need to set some options for a kernel module or you want to blacklist a module. Those things are handled by udev and go into *.conf files in
/etc/modprobe.d/\*.conf.
If you want to specify an option at build time, there are three relevant variables. If you just want to autoload a module that has no autoload capabilities, add it to
KERNEL_MODULE_AUTOLOAD += "your-module"
either in the kernel recipe or in the global variable scope. If you need to specify options for a module, you can do so with
KERNEL_MODULE_AUTOLOAD += "your-module"
KERNEL_MODULE_PROBECONF += "your-module"
module_conf_your-module = "options your-module parametername=parametervalue"
if you want to blacklist a module from autoloading, you can do it intuitively with
KERNEL_MODULE_AUTOLOAD += "your-module"
KERNEL_MODULE_PROBECONF += "your-module"
module_conf_your-module = "blacklist your-module"
8.7.6. Working with udev
Udev (Linux dynamic device management) is a system daemon that handles dynamic device management in /dev. It is controlled by udev rules that are located in /etc/udev/rules.d (sysadmin configuration space) and /lib/udev/rules.d/ (vendor-provided). Here is an example of an udev rule file
# file /etc/udev/rules.d/touchscreen.rules
# Create a symlink to any touchscreen input device
SUBSYSTEM=="input", KERNEL=="event[0-9]*", ATTRS{modalias}=="input:*-e0*,3,*a0,1,*18,*", SYMLINK+="input/touchscreen0"
SUBSYSTEM=="input", KERNEL=="event[0-9]*", ATTRS{modalias}=="ads7846", SYMLINK+="input/touchscreen0"
See https://www.freedesktop.org/software/systemd/man/latest/udev.html for more details about the syntax and usage. To get the list of attributes for a specific device that can be used in an udev rule you can use the udevadm info tool. It prints all existing attributes of the device node and its parents. The key-value pairs from the output can be copied and pasted into a rule file. Some examples
target:~$ udevadm info -a /dev/mmcblk0
target:~$ udevadm info -a /dev/v4l-subdev25
target:~$ udevadm info -a -p /sys/class/net/eth0
After changing an udev rule, you have to notify the daemon. Otherwise, your changes are not reflected. Use the following command
target:~$ udevadm control --reload-rules
While developing udev rules you should monitor the events in order to see when devices are attached or unattached to the system. Use
target:~$ udevadm monitor
Furthermore, it is very useful to monitor the system log in another shell, especially if the rule executes external scripts. Execute
target:~$ journalctl -f
Tip
You cannot start daemons or heavy scripts in a RUN attribute. See https://www.freedesktop.org/software/systemd/man/latest/udev.html#RUN%7Btype%7D .
This can only be used for very short-running foreground tasks. Running an event process for a long period of time may block all further events for this or a dependent device. Starting daemons or other long-running processes is not appropriate for udev; the forked processes, detached or not, will be unconditionally killed after the event handling has finished. You can use the special attribute ENV{SYSTEMD_WANTS}=”service-name.service” and a systemdservice instead.
9. Troubleshooting
9.1. Setscene Task Warning
This warning occurs when the Yocto cache is in a dirty state.
WARNING: Setscene task X ([...]) failed with exit code '1' - real task
You should avoid canceling the build process or if you have to, press Ctrl-C once and wait until the build process has stopped. To remove all these warnings just clean the sstate cache and remove the build folders.
host:~$ bitbake phytec-headless-image -c cleansstate && rm -rf tmp deploy/ipk
10. Yocto Documentation
The most important piece of documentation for a BSP user is probably the developer manual. https://docs.yoctoproject.org/dev/dev-manual/index.html
The chapter about common tasks is a good starting point. https://docs.yoctoproject.org/dev/dev-manual/layers.html#understanding-and-creating-layers
The complete documentation is available on one single HTML page, which is good for searching for a feature or a variable name. https://docs.yoctoproject.org/dev/singleindex.html